该装置是把焊条的名称和型号纵向地印在焊条药皮上。印字带是橡胶粘在印字轮上。
　
　 Prints the anme and type of the electrode, lengthwise on the electrode coating. The printing blocks are made of rubber, stick onto easily detachable drums.

　　本机适用于钢丝绳，紧固件及焊材制造行业。拉拔Ø6.5～Ø2.0mm中低碳类钢或低合金钢线材，本机组根据用户需要，组成单组或多组。

　　This machine is suitable for steel cable, fastener and welding material industry. It can draw medium and low carbon steel and low alloy steel wire rod which diameter is 6.5 to 2.0 mm. The machine can be composed single head to seven head wire drawing machine set according to buyer’s command.

　　本机主要适用于干状和湿状焊药碾和搅拌。
　　本机采用双S轴。相向差速运转，在双底圆弧料缸中均匀地搅拌。

　　This machine is suitable for wet welding powder’s pulverizing and stirring. It also can stir graphite clay and refractory material.
The machine apply double S style shaft. The face of liquid is horizontally installed and vertical to each other. The two shafts work in differential speed and evenly stir actuating medium in double bottom arc medium vat.

　　用途：该机主要用作去除没烘干之前废焊条芯丝上的药皮。具有去除效率高，操作方便，粉尘少的特点。
　　装机功率：1.1KW
　　外形尺寸：L×W×H     550×500×1500

　　This machine is suitable for removing covering of a useless electrode before dried. It is noted for efficient removing, easy operation and little dust.
　　Power: 1.1 kw Overall 
　　dimensions: 550X500X1500

　　该机用作焊接黑色金属丝导线的专用焊机，能用电缆低碳钢丝。焊接轻便灵活，操作简便，焊接牢固，是焊丝理想焊接机械。

　　This machine is a special-purpose welding machine for welding black metal wire and can weld all iron wire by upset welding. It is portable flexible, easily operated and welding tightly, so it is an ideal welding machine for wire drawing and construction unit.

　　　本机适用于拉丝前对有色或黑色金属线材导入和钳制端的轧尖形。

　　This machine is suitable for guiding nonferrous or black steel wire before wire drawing and rolling the clamped end into form.

　　QXB系列立式搅拌机主要适用于干状或湿状的焊药均匀搅拌。也适用于其它行业粉状或小颗粒材料的干湿搅拌混合。
　　本机的立式搅拌筒轴线与铅垂线成30°倾斜，因此被搅拌介质在搅拌的过程中无死角，能被搅拌均匀，该机是一种高效搅拌设备。
　　本面筒体内壁、浆叶、刮刀都喷焊高耐磨材料。具有较长使用寿命。

　　QXB serial vertical mixer is suitable for dry or wet welding powders evenly stirring. It can also be use in other industry for stirring and mixing the powder or the small meter regardless of dry or wet. 
　　The angle between the shaft of the vertical stirring roller and plumb line is 30°, the axis of stirring medium is offset certain distance from the axis of the roller, so the actuating medium has no dead angle and can be stirred evenly in short time. This machine is efficient stirring equipment.

　　YF16型机是一种台式粉团机：FY40A型是一种双缸立式机。两型机分别为YT63型，YT90型和YT120型，YT200B型电焊条液压团之用途。用户将散状焊药放入该机的料缸中，压制成团，后输送给液压涂粉机使用。

　　Model YF16 is a table nodular forming machine and FY40A is an upright one. They and model YT63、YT120 and YT200B welding rod hydraulic powder coating machine form a complete set for forming nodular. The custom adds powdered welding powders into the medium vat of this machine. The welding powders are pressed into cylinder form and are conveyed to powder coating machine.

　　本系列机型适用于中等批量生产Ø2.5（2.0）～5.0mm类普通酸、碱性焊条及特种高性能焊条表面药皮之压涂。
　　本系列机采用机械、液压、电气联合控制操作。且根据焊条的规格、工艺要求，通过控制手轮无级调节焊药输送量。
　　本系列机采用产焊药装填方式通过半自动操台上的按钮分别预选一次或二次输料程序。
　　本系列机的涂压模头为45°型。粉道均采用可换套可卸机构，调偏力矩小，刚度强，精度高，焊条经该模压制成形后。焊药皮致密，表面光滑，偏心稳定。

　　This series machine is suitable for middle producing of all model common acid、common basic and special high performance welding rod which diameter is 2.5(2.0) to5.8(8.0) mm powder coating. 
　　This series machine apply union control through machinery、hydraulic and electric operation. The custom can adjust welding powder’s conveying capacity and coating pressure by control handle’s step-less adjustment according to standard of welding rod and technology requirement.
　　The method of filling the welding powders is pre-set and semi-conveyed. The custom can pre-select one time or tow times conveying program by operating the push button on operation desk.
　　The head of coating module is 45°model. The powder passage apply changeable sleeve and unloading style to adjusting eccentric construction, so the torque of adjusting eccentricity is little、high rigidity and precision. Coating of the welding rod produced by this machine is compact、smooth face and steady eccentricity.

　　本系列机适用于将Ø2.5(2.0)～5.8(8.0)mm长度250～450(700)mm规格焊芯连续自动地从储丝斗中送入涂粉机的45°压涂模中，以满足连续压涂需要。
　　该机设计能满足用户的各种需要。该机的主传动设计，均采用封闭式浸油圆柱齿轮传动，传动精度高，寿命长。送丝结构采用两对送丝轮和一对加速轮立轴传动。各对轮均具有送丝过程中的夹持力补偿。储丝装置采用导轨式安装，可分别调节。

　　This machine is suitable for conveying continuously the welding wire which diameter is 25(2.0) to 5.8(8.0)mm and length is 250 to 450(700)mm to 45°coating module of coating machine from ready hopper, that can satisfy for continuously coating.
　　This machine design has two models: HSP450-H/L model step-less speed adjustable and HSB450-I/II model machinery speed changeable conveyer that can satisfy the user’s demand. There is no bevel gear in main convey case. The conveyer apply the sealed and oiled gear, so the convey is precision and the life of gear is long. Construction welding wires apply two convey wheel and a couple of acceleration wheel for upright shaft conveying. Every wheel have compensate for clamping force during conveying wires. The storing wire applies slide-way pattern installation. You can adjust wick falling’s space. 

　　本机适用于焊条生产线中将涂制的焊条刷除引弧端和夹持端的粉，该机传动，排齐平稳，刷除质量高，引弧端采用宽幅高质砂带。一般适用于长度300～450(700)mm电焊条。

　　This machine is used to remove welding flux on the clamping and arc-starting end of coated welding rod during welding rod production line. It is transmitted and put in order, so the removing is high quality. Arc-starting end is grinded by high quality abrader. The machine is suitable for welding rod which length is 300 to 450(700) mm.

　　This machine is suitable for welding rod factory to retrieve crooked welding rod and straight them.

　　本机是置于焊条生产线中涂粉机与磨头机之间的焊条过渡。其可适用各种规格焊条和不同输出速度的传送。

　　This machine is placed between the coating machine and the head-grinding machine on the welding rod production line. It is suitable for all standard welding rods and convey by different output speed. It can catch coated welding rods stably. 

　　本机适用于压涂普通结构钢焊条药皮，该机可与送丝机，磨头机及烘房等设备组成焊条生产线。本机采用大螺旋挤出轴。低转速将焊药边续地压涂到焊芯表面，生产能力高，工作可靠性强，使用寿命长。

　　This machine is suitable for coating welding flux on ordinary construction steel welding rod. This machine, the conveyer, the head grinding machine and the auto stove room form a welding rod production line. The coating machine applies big spirality squeezing out shaft. Low rotation speed can coat welding flux onto the surface of the welding wire. This device has high production capacity; high working reliability and it is easy to operate.